26934
MAKING A CALL
DELETING RECORDS
NOTE: The phone automatically defaults to touch-
tone dialing. To change to pulse (rotary) dialing,
see "TONE/ PULSE DIALING." If you don't know
which type of service you have, check with the
phone company.
INTRODUCTION
INSTALLATION
CALLER ID FEATURES
40-Channel 900 MHz Caller ID with
CallWaiting CordlessTelephone
User's Guide
To m ake a call, press the TALK button before you dial and
press it again to hang up.
Use the channel/delete button to erase the record currently
shown in the display or all records.
CAUTION: When using telephone equipment,
New call
Date
Time
there are basic safety instructions that should
always be followed. Refer to the IMPORTANT
SAFETY INSTRUCTIONS provided with this
product and save them for future reference.
DESKTOP INSTALLATION
NOTE : The handset can be charged facing up or down.
NEW CALL #
REDIAL
DELETING THE CURRENT RECORD
1. Make sure the phone is OFF (not in TALK m ode).
While the phone is on, press the redial button to redial the
last num ber you dialed (up to 32 digits). If you get a busy
signal, and want to keep dialing the num ber, just press redial
again (you don't have to turn the phone off and back on).
CAUTION: Use only the ATLINKS USA, Inc.
5-2559(black) and 5-2558(white) power supply
that came with this unit. Using other power
supplies may damage the unit.
2. Use the CID/VOL (-) arrow or CID/VOL (+) arrow button to
display the desired Caller ID record.
Your Caller ID phone stores and displays specific
inform ation, provided by your local telephone com pany, to
subscribers of Caller ID or sim ilar caller identification
services.
Caller ID phone number
Caller ID name
3. Press channel/delete. The display shows DELETE?
CID/VOL
TALK
callb ck
a
2
4. Press channel/delete again to erase the record. You will
hear a confirm ation tone. The display shows DELETED.
Then the next Caller ID record shows in the display.
re
d
g
ia
l
form
3
a
t
This unit receives and displays inform ation transm itted by
your local phone com pany. This inform ation can include
the phone num ber, date, and tim e; or the nam e, phone
num ber, date, and tim e. The unit can store up to 40 calls
for later review.
m
e
m
o
ry
FLASH
d
e
f
1
a
b
c
2
5
8
SET UP
h
i
m
n
o
4
7
6
9
#
jkl
Your Caller ID phone enables you to:
p
q
rs
l
w
xyz
tu
v
Use the flash/program button to activate custom calling
services such as call waiting or call transfer, which
are available through your local phone com pany.
ca
n
ce
to
n
e
p
a
u
s
e
*
o
p
e
n
r
0
rin
d
e
a
lete
p
ro
g
ra
m
•
•
•
•
Identify callers before you answer the phone.
View the tim e and date of each incom ing call.
Record up to 40 Caller ID m essages sequentially.
Know who called while you were away.
g
e
r
There are three program m able m enus available: Language,
Tone/Pulse Dialing and Area Code.
ch
n
n
e
l
fla
s
h
3
o
ff
o
DELETING ALL RECORDS
1. Make sure the phone is OFF (not in TALK m ode).
1
TIP: Don’t use the TALK button to activate custom
calling services such as call waiting, or you’ll hang up
the phone.
LANGUAGE SETTING
1. Make sure the phone is OFF (not in TALK m ode).
1. Set the RINGER switch (on the handset) to ON and place
the handset in the cradle on the base.
CALLER ID WITH CALL WAITING
2. Use the CID/VOL (-) arrow or CID/VOL (+) arrow button to
display any Caller ID record.
Provided you subscribe to Caller ID with Call Waiting
service from your phone com pany, you are able to see who
is calling when you hear the call waiting beep.The caller
identification inform ation appears in the display after you
hear the tone.
To get the m ost from your new phone, we suggest that
you take a few m inutes right now to read through this
user's guide.
2. Plug the power supply into the power jack on the
bottom of the base and the other end into an electrical
outlet. The in use/charge indicator com es on, verifying
the battery is charging.
3. Press and hold channel/delete button until the unit
beeps and DELETE ALL? shows in the display.
2. Press the flash/program button until “ 1ENG 2FRA 3ESP”
shows in the display. “1ENG” is the default setting.
IN USE INDICATOR LIGHT
The in use indicator is lit when the handset is charging in
the cradle on the base or when the phone is ON. It flashes
when you receive a call or when the PAGE button is
pressed.
4. Press channel/delete again to erase all records.You will hear a
confirmation tone, and the display shows NO CALLS.
3. Us e th e CID/VOL le ft (-) o r rig h t (+) a rro w b u tto n to
s cro ll to 1ENG 2FRA 3ES P, o r u s e th e to u ch to n e
p a d o n th e h a n d s e t to e n te r th e d e s ire d s e ttin g . For
exam ple, to choose English, press the num ber 1 key.
1ENG is th e d e fa u lt s e ttin g .
IMPORTANT: In order to use all of the features of this
phone, you must subscribe to either the standard
Name/ Number Caller ID Service or Call Waiting
Caller ID Service. To know who is calling while you are
on the phone, you must subscribe to Call Waiting
Caller ID Service.
Allow the phone to charge for 12 hours prior to first use.
If you don't properly charge the phone, battery
performance will be compromised.
•
Press the flash/program button to put the current person
on hold so that you can answer the incom ing call.
DIALING A CALLER ID NUMBER
1. Make sure the phone is OFF (not in TALK m ode).
IMPORTANT: In order to use the Caller ID functions
with this unit, you must subscribe to either the
standard Name/ Number Caller ID Service or Call
Waiting Caller ID Service. To know who is calling while
you are on the phone, you must subscribe to Call
Waiting Caller ID Service.
NOTE: DO NOT connect the telephone line to the
modular jack until the phone has charged for 12 hours.
4. Press fla s h /p ro g ra m to store selection. You will hear a
confirm ation tone.
CHANNEL BUTTON
2. Use the CID/VOL (-) arrow or CID/VOL (+) arrow button to
display the desired Caller ID record.
IMPORTANT: Because cordless phones operate on
electricity, you should have at least one phone in your
home that isn’t cordless, in case the power in your
home goes out.
While talking, you m ight need to m anually change the
channel in order to get rid of static. Press and release the
channel/delete button to advance to the next channel. The
current channel num ber appears on the left side of the
display.
3. Plug the telephone line cord into the PHONE LINE jack
on the bottom of the base and into a m odular jack.
3. Press TALK/callback button. The num ber dials
autom atically.
TONE/ PULSE DIALING
1. Make sure the phone is OFF (not in TALK m ode).
CAUTION: Use only the ATLINKS USA, Inc.
5-2559(black) and 5-2558(white) power supply
that came with this unit. Using other power
supplies may damage the unit.
2. Press the flash/program button until “ 1TONE 2PULSE”
shows in the display. “1TONE” is the default setting.
CHANGING THE CID NUMBER FORMAT
The form at button lets you change the form at of the
CAUTION:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RECEIVING AND STORING CALLS
When you receive a call, the inform ation is transm itted by
the phone com pany to your Caller ID telephone between
the first and second ring.
TEMPORARY TONE
3. Us e th e CID/VOL le ft (-) o r rig h t (+) a rro w b u tto n to
s cro ll to 1TONE o r 2PULS E, o r u s e th e to u ch to n e
p a d o n th e h a n d s e t to e n te r th e d e s ire d s e ttin g . For
exam ple, to choose TONE dialing, press the num ber 1
key. 1TONE is th e d e fa u lt s e ttin g .
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
THE LIGHTNING
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
displayed CID num ber. The available form ats are as follows.
FLASH AND ARROW
WARNING:TO
HEAD WITHIN THE NOT REMOVE COVER (OR
TRIANGLE IS A
This feature enables pulse (rotary) service phone users to
access touch-tone services offered by banks, credit card
companies, etc., by pressing the *tone/cancel button to
temporarily make the phone touch-tone compatible.To get
information about your bank account, for example, you would:
BACK). NO USER
SERVICEABLE PARTS INSIDE.
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSETHIS
NOTE: The phone automatically defaults to touch-
tone dialing. To change to pulse (rotary) dialing, see
"TONE/ PULSE DIALING." If you don't know which
type of service you have, check with your local
telephone company.
7-d ig it
7-digit telephone num ber.
WARNING SIGN
ALERTING YOU OF REFER SERVICING TO
“DANGEROUS
QUALIFIED SERVICE
PERSONNEL.
10 -d ig it
11-d ig it
3-digit area code + 7-digit telephone num ber.
VOLTAGE” INSIDE
THE PRODUCT.
When the m em ory is full, a new call autom atically replaces
the oldest call in m em ory. NEW appears in the display for
calls received that have not been reviewed. REPT indicates
that a new call from the sam e num ber was received m ore
than once.
PRODUCT TO RAIN
OR MOISTURE.
long distance code “1” + 3-digit area code +
7-digit telephone num ber.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
4. Press fla s h /p ro g ra m to store selection. You will hear a
confirm ation tone.
We bring good things to life.
1. Call the bank’s inform ation line.
1. Use the CID/VOL (-) arrow or CID/VOL (+) arrow button to
scroll to the num ber you want to call back.
BEFORE YOU BEGIN
2. Press the *tone/cancel button after your call is answered.
3. Follow the voice instructions to com plete your transaction.
AREA CODE SETTING
1. Make sure the phone is OFF (not in TALK m ode).
WALL MOUNT INSTALLATION
EQUIPMENT APPROVAL INFORMATION
NOTE: Check with your local phone company
regarding name service availability.
2. If the num ber will not dial as shown, press the form at
button. Repeat if necessary, until the correct num ber of
digits are shown.
Your telephone equipment is approved for connection to the Public Switched Telephone
Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the
Technical Requirements for Telephone Terminal Equipment published by ACTA.
PARTS CHECKLIST
Make sure your package includes the item s shown here.
4. Hang up when finished. The phone returns to Pulse
(rotary) service.
2. Press the fla s h /p ro g ra m button until “- - - SET AREA
CODE” shows in the display. “- - -” is the default setting.
1
Notification to the LocalTelephone Company
3. Press TALK/callback button. The num ber dials
autom atically.
On the bottom of this equipment is a label indicating, among other information, the US
number and Ringer Equivalence Number (REN) for the equipment. You must, upon
request, provide this information to your telephone company.
REVIEWING RECORDS
As calls are received and stored, the display is updated to
let you know how m any calls have been received.
3. Use the handset num ber pad to enter your three digit
area code.
5
CANCEL
CID/VOL
TALK
llb ck
page
CID/VOL
c
a
a
r
e
d
g
ia
l
fo
r
m
a
t
m
e
m
o
ry
TALK
d
e
f
The REN is useful in determining the number of devices you may connect to your
telephone line and still have all of these devices ring when your telephone number is
called. In most (but not all) areas, the sum of the RENs of all devices connected to one
line should not exceed 5. To be certain of the number of devices you may connect to
your line as determined by the REN, you should contact your local telephone company.
1
4
7
3
6
9
#
a
b
c
2
callb ck
a
Press the *tone/cancel button to cancel any com m and you
initiated.
MEMORY
Store up to 10 24-digit num bers in m em ory for quick
dialing. This m em ory feature is in addition to the 40 Caller
ID records that can be stored in the Caller ID m em ory log.
h
i
m
n
o
jkl
5
8
0
p
q
r
s
w
x
u
y
z
e
re
d
g
ia
l
form
3
a
t
t
u
v
m
e
m
o
ry
4. Press fla s h /p ro g ra m to store selection. You will hear a
confirm ation tone.
c
a
n
c
e
l
t
o
n
e
p
a
s
*
o
p
e
n
r
d
e
f
2
1
d
e
le
t
e
p
r
o
g
r
a
m
a
b
c
r
in
g
e
r
2
5
8
ch
a
n
n
e
l
fla
s
h
o
ff
o
h
i
m
n
o
4
7
6
9
#
jkl
•
Press the CID/VOL (-) arrow button to scroll through the
call records from the m ost recent to the oldest.
p
q
rs
l
w
xyz
tu
v
ca
n
ce
to
n
e
p
a
u
s
e
*
o
p
e
n
r
0
rin
d
e
a
lete
p
ro
g
ra
m
g
e
r
ch
n
n
e
l
fla
s
h
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
o
ff
o
FINDING THE HANDSET
This feature helps to locate a m isplaced handset.
CORDLESS PHONE BASICS
Handset
AC power
supply
Telephone Belt Clip
line cord
Base
•
Press the CID/VOL (+) arrow button to scroll through the
call records from the oldest to the newest.
4
3
1
STORING A NAME AND NUMBER IN
MEMORY
Press the page button on the base. The handset beeps
continuously for about two m inutes or until you press any
button on the handset. You m ay also press page to cancel.
TELEPHONE JACK REQUIREMENTS
To use this phone, you need an
RJ 11C type m odular telephone jack,
which m ight look like the one
pictured here, installed in your
hom e. If you don’t have a m odular
jack, call your local phone com pany
to find out how to get one installed.
No t e s
•
TRANSFERRING CID RECORDS TO
This equipment may not be used on coin service provided by the telephone
company.
Because it is necessary to charge the handset for 12 hours
prior to connecting the phone for use the first tim e, it is
better to leave the unit on a flat surface during initial
charge before attem pting to hang it on the wall.
display
TALK/
callback
button
Wall plate
MEMORY
1. Make sure the phone is OFF (not in TALK m ode).
•
Party lines are subject to state tariffs, and therefore, you may not be able to use
your own telephone equipment if you are on a party line. Check with your local
telephone company.
NOTE: The ringer does not have to be ON for this
feature to work.
You m ay transfer a Caller ID record to your phone’s m em ory.
2. Press the m em ory button.
Modular
telephone
line jack
•
•
Notice must be given to the telephone company upon permanent disconnection of
your telephone from your line.
left arrow/ -
volume button
3. Press the desired m em ory location (0 through 9).
NOTE: It is important that you format CID records
correctly before storing in memory. It is not possible to
re-format CID records stored in memory.
right arrow/ +
volume button
1. Set the RINGER switch (on the handset) to ON and place
the handset in the cradle on the base.
If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of this product does not disable your alarm equipment. If you
have questions about what will disable alarm equipment, consult your telephone
company or a qualified installer.
CID/VOL
4. Press the m em ory button again. The display shows
ENTER NAME (up to 15 characters).
RINGER SWITCH
The ringer switch m ust be ON for the handset to ring
during incom ing calls.
TALK
callback
2. Plug the power supply into the power jack on the
bottom of the base and the other end into an electrical
outlet. The in use/charge indicator com es on, verifying
the battery is charging.
redial
button
NOTE: If you don't want to enter the name, skip step 5.
format
button
INSTALLATION NOTE: Some cordless telephones
operate at frequencies that may cause interference to
nearby TVs, microwave ovens, and VCRs. To minimize
or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a
TV, microwave ovens, or VCR. If such interference
continues, move the cordless telephone farther away
from these appliances.
1. Use the CID/VOL (-) arrow or CID/VOL (+) arrow button to
scroll to the desired record.
2
Rights of theTelephone Company
redial
form at
m em ory
Should your equipment cause trouble on your line which may harm the telephone network,
the telephone company shall, where practicable, notify you that temporary discontinuance
of service may be required. Where prior notice is not practicable and the circumstances
warrant such action, the telephone company may temporarily discontinue service
immediately. In case of such temporary discontinuance, the telephone company must: (1)
promptly notify you of such temporary discontinuance; (2) afford you the opportunity to
correct the situation; and (3) inform you of your right to bring a complaint to the Commission
pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment,
operations or procedures where such action is required in the operation of its business and
not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the
use or performance of your telephone equipment, the telephone company must give you
adequate notice, in writing, to allow you to maintain uninterrupted service.
def
1
3
6
abc
2
For exam ple, to enter the nam e Bill Sm ith, press the two
key twice for the letter B, press the four key three tim es
for the letter I, and press the five key three tim es for the
letter L. After one second, press the five key three tim es
again for the second letter L and press the one key to
insert a space between the letter L and S. Press the
seven key four tim es for the letter S, press the six key
once for the letter M, press the four key three tim es for
the letter I, press the eight key once for the letter T, and
press the four key twice for the letter H.
memory
button
2. Press the m em ory button.
VOLUME
ghi
m no
4
7
jkl
5
Allow the phone to charge for 12 hours prior to first use.
If you don't properly charge the phone, battery
performance will be compromised.
3. Press the desired m em ory location. You will hear a
confirm ation tone. Exam ple, press the num ber 1 key to
store the record in m em ory location 1.
pqrs
wxyz
9
While talking, press the VOLUME buttons (left and right
arrows) to adjust the listening level of the handset's
earpiece. There are four volum e levels. Press the right
arrow (+) button to increase the volum e level, and press
the left arrow (-) button to decrease. VOL 1 is the lowest
level and VOL 4 is the loudest.
tuv
# pause
button
8
cancel
tone
pause
#
* tone/
cancel
button
*
oper
0
delete
program
flash
ringer
NOTE: DO NOT connect the telephone line to the
modular jack until the phone has charged for 12 hours.
channel
To re p la c e a CID re c o rd s t o re d in a m e m o ry lo c a t io n
w it h a n e w CID re c o rd :
off on
1. Repeat steps 1 through 3.
DIGITAL SECURITY SYSTEM
Your cordless phone uses a digital security system to
provide protection against false ringing, unauthorized
access, and charges to your phone line.
flash/
program
button
channel/
delete
button
HEARING AID COMPATIBILITY (HAC)
3. Plug the telephone line cord into the PHONE LINE jack on the
bottom of the base and the other end into a modular jack.
2. Press the m em ory button and REPLACE MEMO? shows
in the display.
CALL TIMER
While you are talking on the phone, the total talk tim e is
displayed on the bottom line of the display.
This telephone system meets FCC standards for Hearing Aid Compatibility.
NOTE: If you enter a wrong letter, press channel/
delete button to backspace.
ringer switch
4. Slip the m ounting holes on the bracket over the wall
plate posts and firm ly slide the unit down into place
(wall plate not included).
3. Press *tone/cancel to exit, or press m em ory again and
the new CID record replaces the old CID record in that
m em ory location. You will hear a confirm ation tone.
US NUMBER IS LOCATED ON THE CABINET BOTTOM
REN NUMBER IS LOCATED ON THE CABINET BOTTOM
RECEIVING A CALL
1. Check the display to see who is calling.
When you place the handset in the base, the unit verifies
its security code. After a power outage or battery
replacem ent, you should place the handset in the base for
about 20 seconds to reset the code.
ATLINKS US A, In c .
101 West 103rd Street
5. Place the handset in the cradle.
Model 26934
16226400 (Rev. 0 DOM E)
2. Press the TALK button.
Indianapolis, IN 46290
NOTE: If desired, gather the extra line cord together,
and fasten with a wire tie.
© 2003 ATLINKS USA, Inc.
03-19
Tradem ark(s) ® Registered
Marca(s) ® Registrada(s)
Printed in China
|